FET unit overheating

CJay · May 7th, 2009, 01:00

hey guys - basically i have my P90 firing at 430-450ish with a BPS of 30+

triggermaster MK3 and 11.1 Lipo - recently switched to a G+P turbo 3000 and now the damned thing is overheating quite rapidly - never had this problem on my EG1000 marui motor lol

anyone suggest any fixes or am i just gonna have to stick with it? any way to increase the tolerance on the FET?

ujiro · May 7th, 2009, 01:07

Not much you can do to stop that FET from overheating in that situation.. Does it stop overheating when you swap back to the original motor?

CJay · May 7th, 2009, 10:30

yep - go figure - the EG1000 seems to have a better abillity to deal with an sp120 spring than the G+P m120 turbo 3000 i guess :S

ShelledPants · May 7th, 2009, 10:33

Quote:

Originally Posted by CJay

yep - go figure - the EG1000 seems to have a better abillity to deal with an sp120 spring than the G+P m120 turbo 3000 i guess :S

Have you tried a Guarder Infinite Torque Up motor? I've heard great things about them, and they're half the price of Magnums.

Skruface · May 8th, 2009, 23:37

Quote:

Originally Posted by CJay

hey guys - basically i have my P90 firing at 430-450ish with a BPS of 30+

triggermaster MK3 and 11.1 Lipo - recently switched to a G+P turbo 3000 and now the damned thing is overheating quite rapidly - never had this problem on my EG1000 marui motor lol

anyone suggest any fixes or am i just gonna have to stick with it? any way to increase the tolerance on the FET?

G&P doesn't make a Turbo 3000.....ICS does.

I'd HIGHLY recommend a proper G&P M160 "Turbocharger". I have one in a LiPo-run 500 FPS M16 build and it's awesome.

CJay · May 9th, 2009, 01:30

would upgrading to a higher torque motor reduce heat then? I didn't think that would make much of a difference?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 7th, 2009, 01:00	#1
CJay Trader rating Join Date: Oct 2008 Location: Belle River, ON	FET unit overheating hey guys - basically i have my P90 firing at 430-450ish with a BPS of 30+ triggermaster MK3 and 11.1 Lipo - recently switched to a G+P turbo 3000 and now the damned thing is overheating quite rapidly - never had this problem on my EG1000 marui motor lol anyone suggest any fixes or am i just gonna have to stick with it? any way to increase the tolerance on the FET?

May 7th, 2009, 01:07	#2
ujiro Trader rating Join Date: Aug 2006 Location: Burlington, ON	Not much you can do to stop that FET from overheating in that situation.. Does it stop overheating when you swap back to the original motor? __________________ I love freedom and consequently America

May 7th, 2009, 10:30	#3
CJay Trader rating Join Date: Oct 2008 Location: Belle River, ON	yep - go figure - the EG1000 seems to have a better abillity to deal with an sp120 spring than the G+P m120 turbo 3000 i guess :S

May 9th, 2009, 01:30	#6
CJay Trader rating Join Date: Oct 2008 Location: Belle River, ON	would upgrading to a higher torque motor reduce heat then? I didn't think that would make much of a difference?

FET unit overheating

Doctor's Corner