|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
July 11th, 2012, 02:59
|
#1 |
|
kmp9 low power bolt
i installed my kmp9 low power bolt today and went and had it chrono'd apparently its shooting 260? does this seem kind of low anyone else experience this or have a solution?
|
|
|
|
|
July 11th, 2012, 03:27
|
#2 |
|
Were you using heavier BBs by accident? (Has happened to me
 )If it was shooting at the correct fps with the regular bolt, it might be something with the cylinder/flute valve.
__________________
H&K G36c (KWA) / Glock 18c (TM) / Kimber LAPD SWAT Custom (TM) / Mossberg M500 (ACM) 
|
|
|
|
|
July 11th, 2012, 07:07
|
#3 |
|
Nope regular bolt stock no mods shooting 370 with .25g (played outdoors) an 260 when installed the low power, these are the Only references I have since I don't own my own chrono
Last edited by mr.hyde; July 11th, 2012 at 09:08.. |
|
|
|
|
|
July 11th, 2012, 09:25
|
#4 | |
|
Your hop-up rubber was probably close to give-in.
Take it appart and check carefully for cracks and wear on the inner edge. And shooting 380 on .25, your hop-up was probably quite high. Drop that down a bit.
__________________
Quote:
|
|
|
|
|
|
July 11th, 2012, 09:26
|
#5 | |
|
aka coachster
|
Quote:
|
|
|
|
|
|
July 11th, 2012, 10:11
|
#6 |
|
Well I used a chrono I just don't own one. I don't pull numbers outta my arse.
|
|
|
|
|
|
July 11th, 2012, 10:22
|
#7 |
|
What's it supposed to be shooting?
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
July 11th, 2012, 10:25
|
#8 |
|
Apparently they said 320 ish
|
|
|
|
|
|
July 11th, 2012, 12:01
|
#9 |
|
|
Well you said it's shooting 290-300 on 0.20's. Is that not good enough?
__________________
Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
July 11th, 2012, 12:04
|
#10 | |
|
|
Mine was shooting close to 300 with .20 on propane, with the low power bolt.
And around 380 with .20 on propane again, with the "normal" bolt. The only difference (I swaped parts to confirm) is the rocket valve in it. Low power uses a cylinder and high power used a flute/rocket valve
__________________
Quote:
|
|
|
|
|
|
July 11th, 2012, 12:18
|
#11 |
|
260 with .2g using the low power. I'm worried more about damage then fps, I'm not out to hurt people
|
|
|
|
|
|
July 11th, 2012, 13:25
|
#12 |
|
I was thinking low on gas but the ns2 doesn't really fluctuate that much does it? I'll do some test firing tonight see what the flight pattern is like on the bb
|
|
|
|
|
|
July 11th, 2012, 13:28
|
#13 | ||
|
|
Quote:
Because 260 with .25 is about right on at 300 with .20...
__________________
Quote:
|
||
|
|
|
|
July 11th, 2012, 13:36
|
#14 |
|
It was chronod by the guys at xtreme tactics and all they use is .20
|
|
|
|
|
|
July 12th, 2012, 09:37
|
#15 |
|
Seems to shoot fine, rate of fire is about the same. Maybe it's just the bolt?
|
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
