|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 8th, 2012, 13:10
|
#1 |
|
Need help fixing KWA KP45 Tactical
Hello everyone. I pulled out my KWA gbb pistol out a few weeks ago and discovered that it had almost no gas efficiency. I think one of the valves must have gone bad over the winter but I don't have a spare magazine to test in the gun so everything is speculation. I did some googling but couldn't find a definitive answer and I'm inexperienced with working on gbb's so any help would be greatly appreciated in helping me diagnose the problem. Thanks.
|
|
|
|
|
June 8th, 2012, 13:57
|
#2 |
|
Did you store your magazine with a small bit of gas in it over the winter?
|
|
|
|
|
June 8th, 2012, 15:02
|
#3 |
|
I believe so, I usually store the mag with some gas in it, but I can't say for sure.
|
|
|
|
|
|
June 8th, 2012, 15:10
|
#4 |
|
|
The gas should be changed out every month if you don't use it. Your seals could be dried out. Inspect the valve - could just be dirty. Try soaking the valve in 100% pure silicon oil (important) for a few hours. Might need a new valve if its damaged.
|
|
|
|
|
June 8th, 2012, 18:50
|
#5 |
|
Ok thanks a lot, I'll try and figure that out tonight.
|
|
|
|
|
|
June 8th, 2012, 22:18
|
#6 |
|
I'm sorry RosettaStoned, but what valve are you referring to, in the magazine or blow-back unit?
|
|
|
|
|
|
June 9th, 2012, 09:54
|
#7 |
|
"bb bukakke" KING!
|
There's only 2 valves on the magazine:
the knocker valve that releases the gas... hit it manually with your thumb to see if it will vent gas. The fill valve... you need a special tool to pull this out, both have orings. |
|
|
|
|
June 11th, 2012, 11:44
|
#8 |
|
Ok well I guess the knocker valve works cause it did vent the gas I put in the mag.
|
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
