![]() |
|
|
||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
![]() |
|
Thread Tools |
![]() |
#1 |
Does Marui Slide Stop fits Western Arms?
Anyone know if a Marui Slide stop fits in a WA 1911?
Last edited by p.phresh; March 17th, 2012 at 14:40.. |
|
![]() |
![]() |
![]() |
#2 |
does anybody know this at all?
|
|
![]() |
![]() |
![]() |
#3 |
TM and WA have very different designs. I'd be quite amazed to hear of any parts that can be swapped between the two.
__________________
![]() |
|
![]() |
![]() |
![]() |
#4 |
Can't fix my own guns. Willing to fix yours.
|
they are the same in general, but the main axle may be a different diameter depending on the model, as well as the nub to catch the mag follower and push it up is also probably slightly different, though I wouldnt be too surprised if it did fit... Ive got one around here somewhere, Ill post again after I find a TM catch and try it out
|
![]() |
![]() |
![]() |
#5 |
They don't....
|
|
![]() |
![]() |
![]() |
#6 |
A TM M1911A1 catch does not work on an R-Type Infinity. It was too long and hit the grip. Not sure about a 1911 frame though.
A mainspring housing kind of fits... sort of.... its a little short though but you can pin it into the grip if you were wondering. For curiosity's sake I tried a TM barrel assembly in an R-Type slide on a TM body... no go. It did look pretty cool but it just vents gas since the loading nozzle gas route doesn't line up. |
|
![]() |
![]() |
![]() ![]() |
|
Bookmarks |
|
|
![]() |