|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
February 21st, 2011, 14:15
|
#1 |
|
kp-07 co2 1911 venting issue!
I just bought a kjw kp07 co2. I fired 1 full mag with without a problem but now any subsequent co2 cartridges that I put in the mag vent fully. I pull the trigger, hammer strikes the valve, slide comes back about a half inch, and all the gas vents! It is brand new. I took it out of the box, disassembled and lubed it but now it is venting! Any thoughts on a fix?
|
|
|
|
|
February 23rd, 2011, 17:05
|
#2 |
|
GBB Whisperer
|
Sounds like your nozzle has either cracked, OR the outer barrel is jamming itself against the slide (this is a common problem with KJW's Hi-Capa clones.)
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
