![]() |
|
|
||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
![]() |
|
Thread Tools |
![]() |
#241 | |
Quote:
Same goes for the MEU as does the Hi-Capa? Can someone verify this? |
||
![]() |
![]() |
![]() |
#242 |
Slow mo.
|
yeah same thing...
__________________
The ultimate measure of a man is not where he stands in moments of comfort and convenience, but where he stands at times of challenge and controversy. - Martin Luther King, Jr. ![]() |
![]() |
![]() |
![]() |
#243 | |
GBB Whisperer
|
Quote:
I use slightly higher quality bamboo chopsticks (that you still have to snap apart) - chop off a small piece of it, maybe 1" in length. I use that as a punch to knock the sight out through the dovetail. DON'T use a metal punch or you'll scratch/damage your sight/slide. This is why I use a wooden/bamboo punch. Bamboo ones are stronger than the crappy wooden ones which will shatter when you punch down. |
|
![]() |
![]() |
![]() |
#244 | |
Quote:
|
||
![]() |
![]() |
![]() |
#245 | |
GBB Whisperer
|
Quote:
Punch at the base - never do it to the post or you can snap it clean off the base (I've done this before.) |
|
![]() |
![]() |
![]() |
#246 | |
Quote:
__________________
I love freedom and consequently America |
||
![]() |
![]() |
![]() |
#247 |
GBB Whisperer
|
No fury required. It can happen with a very light tap. It's soft die-cast metal, with the post formed at a right angle to the base. It's not hard to break it clean at the edge.
|
![]() |
![]() |
![]() |
#248 |
Captain Sunshine
|
|
![]() |
![]() |
![]() |
#249 |
GBB Whisperer
|
Oh, hahahaha. Yes, in that case there was quite a bit of leg thrashing and crying.
|
![]() |
![]() |
![]() |
#250 |
![]() |
![]() |
![]() |
#251 |
Tys
|
THAT...is the reason one of my pistols has an aftermarket fiber optic front sight on it....
![]() AND THAT is the reason I have 2 extras slides and complete front and rear Hicapa sight sets just sitting in a box. |
![]() |
![]() |
![]() |
#252 |
Could someone be so kind as to list the companies that make a 1911 GBB? AFAIK, the following companies make them:
1911: - TM - WE - KSC - KJW - WA - Army (?) - Socom Gear (?) - Bell - Meister (Murashin?) - RWC - Tanaka - J-Armory (?) - KWC 2011: - TM (?) - KSC MEU: - TM - Army(?) - WA - Socom Gear - WE Probably still missing some. edit: Listed edited.
__________________
![]() Last edited by aznpos531; March 6th, 2010 at 14:25.. |
|
![]() |
![]() |
![]() |
#253 |
Official ASC "Dumb Ass"
|
Bell
__________________
![]() |
![]() |
![]() |
![]() |
#254 |
Meister (I think they do, at least). Pretty sure the only single stacker that Army makes is a MEU.
|
|
![]() |
![]() |
![]() |
#255 |
Slow mo.
|
Damn me for tinkering with my 1911 again. I swapped almost everything out and back in and its still firing like a limp p3nis. I've ruled out any possibility of it being the upper assembly from all the swapping. I think it has to do with the striker/valve knocker. It seems to be working the way its supposed to without the mag in (ie. rack the slide, valve knocker retracts so its flush with the chassis wall, press the trigger and it kicks out) so I'm at a loss for what I can do to find out exactly what's going on with it.
__________________
The ultimate measure of a man is not where he stands in moments of comfort and convenience, but where he stands at times of challenge and controversy. - Martin Luther King, Jr. ![]() Last edited by Slono; March 7th, 2010 at 11:51.. |
![]() |
![]() |
![]() ![]() |
|
Bookmarks |
|
|
![]() |