We g36c gbb

[Styrak]

No offense but the fake bullet sticker looks really corny.
Otherwise, the G36 looks good.

[Riko]

yeah I know,

when I get a extra mag, I will try to open it so I can put those prints in the INSIDE, that will look indeed better


On the shooting of it, I got some propane so I can shoot if for the first time.
Mixed feelings, semi is perfect
But in automatic mode, I had to recock the gun many times because the hammer got stuck....dunno why that is
In the WE test the guy shot like 18 mags in a row in automatic mode and it went perfect PFF

[onpoint]

just waiting to get my we m14 ebr!!!!! ill post the review of the we g 39c in a couple of days but nothing wrong yet 2 bags of bastards not one fuck up yet!!!!!!
its a realy nice build

[Ninja_En_Short]

@ Riko : it uses more or less the same trigger box as the SCAR. Some had problems and fixed them but unmounting and putting back together with correct oil

[Riko]

Lol, I have indeed had the same probs with my scar, but that was due to replacing the hammer with the ra tech hammer, wich is actually for an M4

after repairing and replacing it back with my stock hammer, the problems of my scar seem over.

and I always use a shitload of silicon oil for my trigger assembly
so I think and hope are due to the fact I havent fired the gun a lot yet, it might have to break in still....
when I shot it yesterday I only shoot 2-3 mags, so I will try again to shoot tomorow (today I spent all day with my scar and fixing it)

[Riko]

okay, my findings so far concerning my automatic mode problem with the WE G39

when shooting semi, its works perfect, it is a real joy to shoot this in semi, the kick is just wow!

In auto its a different story, it wont work as good and it depends if you shoot with bursts or not.
If you shoot auto with burst shots, it will happen (at least with my gun) that the sear wont release the hammer so I have to switch to semi to release the hammer....
BUT if you shoot the gun from start to finish in full automatic, basically empty your mag, than it will work out. Actually just like on the WE promo film.
So I honestly would like to see them shot the gun with burst, because all they did was empty 18 mags in a row non stop!


ps: I will upload some pics later on with my laser-red dot on it

[Brian McIlmoyle]

Originally Posted by Riko

okay, my findings so far concerning my automatic mode problem with the WE G39

when shooting semi, its works perfect, it is a real joy to shoot this in semi, the kick is just wow!

In auto its a different story, it wont work as good and it depends if you shoot with bursts or not.
If you shoot auto with burst shots, it will happen (at least with my gun) that the sear wont release the hammer so I have to switch to semi to release the hammer....
BUT if you shoot the gun from start to finish in full automatic, basically empty your mag, than it will work out. Actually just like on the WE promo film.
So I honestly would like to see them shot the gun with burst, because all they did was empty 18 mags in a row non stop!


ps: I will upload some pics later on with my laser-red dot on it

I have had zero trouble shooting bursts with the G39C ... you seem to have bad luck with guns... are you a tinkerer? as in you just cant leave it alone?

[Riko]

Now i am

But it was bad already before tinkering....
+ i havent disassembled it in the trigger area and there lies the problem i think


ps: if there is a problem, just by watching at it it wont get solved

[Riko]

I have a problem with all the gas ejecting when shooting in full auto, see my topic, with pics:

http://www.airsoftcanada.com/showthread.php?t=113906

[wildcard]

Check for jammed and chopped BB, I had mags vents twice but after a takedown it was a jammed bb that got chopped and a piece of it jammed

[Riko]

I did a full takedown as you can see....and no sign of a splintered bb....

Like i said, semi works perfect, its only with full auto i get these gas vents

[DoctorBadVibez]

Handled two of em to check for consistency, didn't come across any issues with burst modes, excellent weight distribution, very comfy, very light (that alone must have an augmenting effect on blowback, only two issues one had an issue with bb getting lost near magwell area, this issue presented itself multiple times, and mag bottom plate hole was not drilled to be aligned with the valve. Also if you take (slide) off the plate from the bottom of the mag, be sure to put it back in proper orientation, otherwise it will jam up on the grooves on the mag. Overall, this may be a smashing hit for those of you getting them.

[Riko]

When all the gas vents out of the mag, this is where the jammed bb sits.


I dunno if that bb causes the venting, but there is always a jammed bb at that spot

And just to make sure, but does the nozzle tip looks with everyone like this?


its not 100% round (like the top red circle), but at the top its more flat....(like in the bottom red circle)
I think its normal, but I just wanna check




EDIT:
PROBLEM SOLVED, SOLUTION:
I used another brand of bb's, I used Cybergun AEG Expert bio bb's (.20g)
The bb's that DIDN'T work in full auto were the G&G .20, http://www.wgcshop.com/wgc2008/main/...item=GG-07-096
So be aware!

And I thought those bio bb's of "lesser" quality (I think that because those G&G ones had a very good rep) wouldnt make any difference....BUT NOO
I was out of options so, I tought to myself, well why dont I just try the tip from someone on the canada forum and use other bb's!

The difference between the G&G and the Cybergun bio other than the fact that its bio, is also that the Cyberguns have much more

[Riko]

alright, I have installed my RA Tech M14 inner barrel into my fullsized WE G36.

Here is comparison between the new inner barrel and the stock inner barrel:


This i how looks now (I know its crappy, but better quality pics will follow):


My fps is around 450-460 fps, peaks around 470-480 fps. But I live in Belgium and right now its winter and I am shooting in my attic, where there is no heating
I estimate temps being around 15 degrees celcius maximum.
I was hoping it to shoot constantly around the 490 - 500 fps, but I guess I will reach those figures in summer time. And I wonder what fps I will reach in summer with co2

All in all, great gun, great set up!!! I am a happy WE customer!
I hope that WE will bring out a P90 gas blowback as well!

[kalnaren]

Riko, that G36 makes me want to do the same!

I forsee a Christmas present for myself.