We g36c gbb

HeadlessChicken · October 13th, 2010, 21:58

Thanks Kull.

aZn_triXta07 · October 14th, 2010, 02:21

You know ... I could always get DaytonaGun to do a small run of high quality steel parts for WE guns if people are complaining about 'quality' that much.

Whatever the price is appealing and now WE stuff is easily accessible, this is alot better then two years go.

Again, if I end up spending over 1K on something unless its a support weapon or something really rare I'd rather invest in real steel.

Anything Norinco/Dominion Arms will outlast any airsoft item lol

Ninja_En_Short · October 14th, 2010, 05:34

@Headlesschicken : I have a solution for you too, I bought Pantac universal shingle and G36 mags fit perfectly in, I don't even have to force to get them out and there's some kind of simili leather inside that prevents the mag from sliping, I played two weeks ago without using the bungie cords, Mags didn't slip one bit

For the video I watch it again, my eye was caught by the buffer plate : isn't there a weird rubber like piece on the bottom of it ?

Sim123456 · October 14th, 2010, 09:52

Ra-Tech is actualy making steel aftermaket parts for all non steel m14 counter parts. Ranging from a complete steel receiver, to a complete steel trigger set, bolt carrier etc. I'm buying the ones available yet and will continue until almost everything on it is made of steel. That should be stronger enough for a WE product ^^

Brian McIlmoyle · October 14th, 2010, 10:48

Quote:

Originally Posted by HeadlessChicken

I might actually jump on the the WE GBBR bandwagon with their G39C, I personally love G36s in general. My main concern really is finding the right pouches to fit G36 mags. I know most people break off the tabs that lock the mags together and sand them down but I don't know if I'd wanna do that with these GBBR G36 mags.

Um... what about getting mag pouches made for G36 mags?

http://www.dropzonetactical.com/pouches/g36.html There you go.. even Canadian made

Crunchmeister · October 14th, 2010, 10:50

A P90 GBBr would be nice. With the P90 design being what it is, they could actually break from having the gas stored in the mag to storing the gas in the gun itself. With the large rear end and no need for battery or gearbox, the body of the gun could hold a rather large gas reservoir - enough to fire off several mags' worth of gas.

kullwarrior · October 14th, 2010, 10:54

Quote:

Originally Posted by Sim123456

Ra-Tech is actualy making steel aftermaket parts for all non steel m14 counter parts. Ranging from a complete steel receiver, to a complete steel trigger set, bolt carrier etc. I'm buying the ones available yet and will continue until almost everything on it is made of steel. That should be stronger enough for a WE product ^^

Keep in mind RA-Tech uses quite a soft steel for what grade of steel they use. DG definitely used a better ones.

Nocturnal · October 14th, 2010, 11:17

you could use M14 mag pouches for the G36c mags? only thing is that they might be too long for the pouch unless you have an adjustable length.

When they land in Canada, I hope to try one out! **cough cough** VA!?

The Lettonian · October 14th, 2010, 11:20

Quote:

Originally Posted by m102404

They'd better have scratched their heads and figured out the back plate longevity issues...it'd be a shame if they repeat the SCAR issue.

Gas capacity would be great.

I'd much rather take a G36K GBBR than a G36C...just for looks.

You may be in luck...he does mention the possibility of doing a K in the future. Not to mention it seems like a decent next step - how hard can it be to put a new front end on an existing model? ....right?

Daiviet · October 14th, 2010, 11:52

Quote:

Originally Posted by FNG_13

You may be in luck...he does mention the possibility of doing a K in the future. Not to mention it seems like a decent next step - how hard can it be to put a new front end on an existing model? ....right?

Lol, sounds like you're drooling there mate. I know you're definitely itching for the G36

Cilantro · October 14th, 2010, 12:07

I'd like to think the G36 mag "issues" could be solved with AN AR magwell adapter, like AEGs. And quite frankly, if it IS possible to have, and WE made them, I would love them forever. The ability to use standard mags for pretty much ALL of their GBBR products (minus the M14, of course) would be too much awesome, and a little lighter on the wallet, of course.

Sim123456 · October 14th, 2010, 13:44

Quote:

Keep in mind RA-Tech uses quite a soft steel for what grade of steel they use

I know, nothing's perfect ^^

jordan7831 · October 14th, 2010, 14:53

Mag test video is up
YouTube - WE G39C 18 mags test

kullwarrior · October 14th, 2010, 18:01

Quote:

Originally Posted by Sim123456

I know, nothing's perfect ^^

When they charge more than Justin Lee of Daytonagun and give you something quality wise inferior I complain.

HeadlessChicken · October 14th, 2010, 20:33

Quote:

Originally Posted by Brian McIlmoyle

Um... what about getting mag pouches made for G36 mags?

http://www.dropzonetactical.com/pouches/g36.html There you go.. even Canadian made

Wow thanks Brian. I searched a couple years ago and just gave up after 2 weeks. Mind you I was also looking at only a few sets of retailers.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 13th, 2010, 21:58	#31
HeadlessChicken Trader rating Join Date: Oct 2008 Location: Toronto, Ontario, Canada	Thanks Kull. __________________ "Hey I'm the first one to say its a great country but its a straaaaange culture. This is a place where gun store owners are given a list of stolen credit cards but not a list of CRIMINALS and MANIACS. And now they're thinking of banning toy guns...AND THEY'RE GONNA KEEP THE F**KING REAL ONES!" -George Carlin 1937 - 2008 (RIP buddy)

October 14th, 2010, 05:34	#33
Ninja_En_Short Trader rating Join Date: Jul 2007 Location: France, Canada (Montréal)	@Headlesschicken : I have a solution for you too, I bought Pantac universal shingle and G36 mags fit perfectly in, I don't even have to force to get them out and there's some kind of simili leather inside that prevents the mag from sliping, I played two weeks ago without using the bungie cords, Mags didn't slip one bit For the video I watch it again, my eye was caught by the buffer plate : isn't there a weird rubber like piece on the bottom of it ? __________________ Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes... I can do a CTRL+ATL+DEL on your gun ! Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring) Heavy custom builder (including painting)

October 14th, 2010, 10:50	#36
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	A P90 GBBr would be nice. With the P90 design being what it is, they could actually break from having the gas stored in the mag to storing the gas in the gun itself. With the large rear end and no need for battery or gearbox, the body of the gun could hold a rather large gas reservoir - enough to fire off several mags' worth of gas. __________________

October 14th, 2010, 02:21	#32
aZn_triXta07 Trader rating Join Date: Nov 2005 Location: Toronto, Ontario	You know ... I could always get DaytonaGun to do a small run of high quality steel parts for WE guns if people are complaining about 'quality' that much. Whatever the price is appealing and now WE stuff is easily accessible, this is alot better then two years go. Again, if I end up spending over 1K on something unless its a support weapon or something really rare I'd rather invest in real steel. Anything Norinco/Dominion Arms will outlast any airsoft item lol

October 14th, 2010, 09:52	#34
Sim123456 Trader rating Join Date: Oct 2008 Location: Laval	Ra-Tech is actualy making steel aftermaket parts for all non steel m14 counter parts. Ranging from a complete steel receiver, to a complete steel trigger set, bolt carrier etc. I'm buying the ones available yet and will continue until almost everything on it is made of steel. That should be stronger enough for a WE product ^^

October 14th, 2010, 11:17	#38
Nocturnal oO? Trader rating Join Date: Feb 2004 Location: Stouffville, ON	you could use M14 mag pouches for the G36c mags? only thing is that they might be too long for the pouch unless you have an adjustable length. When they land in Canada, I hope to try one out! cough cough VA!? __________________ *"SI VIS PACEM, PARA BELLUM"* Last edited by Nocturnal; October 14th, 2010 at 11:21..

October 14th, 2010, 12:07	#41
Cilantro formerly Omega! Trader rating Join Date: Oct 2005 Location: Ottawa	I'd like to think the G36 mag "issues" could be solved with AN AR magwell adapter, like AEGs. And quite frankly, if it IS possible to have, and WE made them, I would love them forever. The ability to use standard mags for pretty much ALL of their GBBR products (minus the M14, of course) would be too much awesome, and a little lighter on the wallet, of course. __________________ "History shall be kind to me, for I intend to write it." - Sir Winston Churchill

October 14th, 2010, 14:53	#43
jordan7831 will always be Mike Litoris in our hearts Trader rating Join Date: Jul 2004 Location: North York - Toronto	Mag test video is up YouTube - WE G39C 18 mags test

We g36c gbb

Airsoft Guns Discussion