xcortech 3200

[Rooster]

Figured I'd just hijack this thread instead of starting a new one, does anyone have experience with the Xcortech not reading rate of fire?

From day one when I took it out of the box, it reads the fps fine but nothing on the rps..

[cetane]

How long a burst did you put through? Needs 10+ rounds

[Rooster]

I'm not sure really, I'll try again with a long burst. Thanks.

[Rooster]

Well that was it. Thanks for that, such a simple solution.

[Styrak]

Originally Posted by slink182

You don't need to open it. Just keep shaking it - eventually the BB bits will fall out via the sensor slots.

If you want to clean it out properly you have to disassemble it. And cleaning off the sensors is good, if you can.

I do the same thing periodically to my Madbull chrono, or it starts giving wrong readings.

[unknownvariable]

I am less than impressed with them. Mine doesn't capture any readings after very minimal use. I stripped it down to check everything and don't see anything wrong.