Need help choosing battery and charger

[sledgehammer]

I just bought an AEG CA36C from A&A airsoft. Now I'm not sure which battery and charger I should get. I heard TLP 4000C is good, but not sure if it's a must-buy. Is the charger easy to use?

For battery, I like intellect 8.4V 1400mah, but not sure if the battery will fit my gun compartment.

Could you guys tell me if the accessories I mentioned above are gonna be fine in my CA36C? Or you have something better?

[Spa]

intellect is a good choice and the 8.4v 1400 will fit it.

Charger...if you want the best charger, get an ICE:P with a pro performance power source. but thats if you want the best:P and i dont know much about chargers except the really good/expensive ones.

[sledgehammer]

Originally Posted by Spa

intellect is a good choice and the 8.4v 1400 will fit it.

Charger...if you want the best charger, get an ICE:P with a pro performance power source. but thats if you want the best:P and i dont know much about chargers except the really good/expensive ones.

Hey thanks for the answer.
There's mini 8.4V 1400 and then there's a bigger one. I don't know which size to buy::-?

Where can I get this ICE charger with a good price?

[ThunderCactus]

i use a pirahna digital peak charger, like 50$ on ebay, awesome charger

[The Saint]

Intellect 8.4v 1400mah mini, pretty much the best mini out there at the moment.

[sledgehammer]

Originally Posted by ThunderCactus

i use a pirahna digital peak charger, like 50$ on ebay, awesome charger

I just took your advice to go for Pirahna

[xhale]

Same charger (rebranded) as the TLP 15 which is better than the 4000C:

iNTEGY INDI 16X4-Pro
http://cgi.ebay.ca/ws/eBayISAPI.dll?...=STRK:MEWA:VRI

[Spa]

you can try 9.6v minis...but i do not know forsure on fitting them into a G36C. Im assuming you can, but with much difficulty trying to get on the barrel grip with all of the wiring and fuse.

[Syn]

Going to 9.6v, I would have to upgrade mechbox parts for my JG g36c. You might have to also.

To make a 9.6 pack fit you will likely need to mod:
http://uncompany.com/information/mod...6c1100modi.asp
http://uncompany.com/information/mod...6c1500modi.asp

[Colin_S]

The cells to the Sanyo 9.6V mini battery pack must be physically larger because I have no problems fitting a 9.6V 1400mAh Intellect mini into the foregrip of my G36C. It's tighter but it fits without any problems (or mods needed) and I didn't remove my fuse or adjust the wiring.