|
got mine couple weeks ago, just been too lazy to do some review. so here is my input:
I installed the AG trigger box in my RA-Tech forged lower. the rear screw which secure the box inside the lower CAN NOT be tighten too much, otherwise the fire pin won't reset properly, the fire pin will stuck at half way instead of going all the way back when the hammer is cocked.
The trigger is adjustable as they advertised, much shorter trigger travel distance compare to the Ra-tech trigger but pretty much the same as the WE stock trigger when they were pulled to release hammer. mine has been set to 2mm trigger pull which has fired through 5 mags without any issue so far.
Trigger pull is heavy, compared to stock WE trigger box and RA-Tech trigger box, but still acceptable. some users on FB claims the trigger pull can go lighter if remove the trigger spring on 1 side, but I kinda doubt it.
In my opinion, it's not really worthy for $180 CAD unless you really want a fancy trigger on your WE M4 so bad, or only if Angry gun can make the trigger pull weight adjustable as well in this product.
my 2 cents
__________________
|
July 29th, 2015, 20:24
