King Arms M4/M16 mags

drek · February 2nd, 2011, 21:40

Im having feed problems with these King Arms low cap mags...they hold 68.

I have a G&G m4 commando, anything i can to these mags to make them work properly?

Rooster · February 2nd, 2011, 21:42

Are they new mags? Maybe they could just use an oiling?

venture · February 2nd, 2011, 21:42

search for modifications to these mags. I think people shave the feed tube down a bit and they work.

dirtdiver · February 2nd, 2011, 21:47

What brand of bbs are you using? I had alot of trouble with a set of new mags and thought they were crap... Turns out it was the bbs! Thru bastards in them and never had a problem again...

If it's not the bbs check the feed tube to see if there are any burrs or imperfections in the seam of the mag and smooth these out then apply a light coating of silicone oil. Buy I'd try a different brand of bbs first.

audi_bhoy · February 2nd, 2011, 21:55

Have you tried pushing the mag forward? It seems to me that King Arms M4 mags are smaller than the magwell. If it is working, try putting some velcro on the back of the magwell.

drek · February 2nd, 2011, 21:56

im using g&g .20g 90% natural, i also have a bag of g&g P.S.B.B .20g maybe ill try them, i found something about the mod but it doesnt go very in depth..i dont really understand it

Posted By pmc84x

"I've had JG, MAG, and King Arms mags fit, all you gotta do is shave down the lip on the back side where it locks onto the mag release. Takes 1-2 mins with a knife.

Watch your fingers :P"

fleuryfighter · February 2nd, 2011, 22:01

I think its the hop up unit because i have a G&G M4 and my king arms mags Both Plastic and Metal ones feed fine. But i put a G&P Metal hop-up Unit in. ill go right now and check if i have a problem with the Old unit.

EDIT: I loaded up one plastic and one metal King Arms Mag with bb bastard .28g bb's and They both fed fine first on semi then emptied on full auto at 20 +/- 1 bb/s. Maybe its the bb's but i have had no problems with the king arms mags

drek · February 2nd, 2011, 22:04

Well my highcap mag that came with the gun fires fine so its not the gun, its the KA mags

fleuryfighter · February 2nd, 2011, 22:13

It Might be the hop up unit?? or maybe the bb's

Darklen · February 2nd, 2011, 22:17

1/2" wide strip of loop Velcro on the back of the mag well should solve the problem. Some G&G AR models magwells are a bit on the loose side for non G&G mags, others are fine.

drek · February 2nd, 2011, 22:33

Quote:

Originally Posted by Darklen

1/2" wide strip of loop Velcro on the back of the mag well should solve the problem. Some G&G AR models magwells are a bit on the loose side for non G&G mags, others are fine.

edit, nvm

drek · February 2nd, 2011, 22:45

ah ha! From what ive read, i tried shaving down the tab that holds the bb's in the mag, and boom it works just fine now. I put my orig highcap mag beside the KA mag and sure enough the tab that holds the bb's in is slightly bigger on the KA mag.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 2nd, 2011, 21:40	#1
drek Trader rating Join Date: Jan 2011 Location: Red Deer, AB	King Arms M4/M16 mags Im having feed problems with these King Arms low cap mags...they hold 68. I have a G&G m4 commando, anything i can to these mags to make them work properly?

February 2nd, 2011, 21:42	#3
venture Trader rating Join Date: Jun 2005 Location: Halifax	search for modifications to these mags. I think people shave the feed tube down a bit and they work. __________________ Visit us at :www.ventureairsoft.ca

February 2nd, 2011, 21:47	#4
dirtdiver Trader rating Join Date: Nov 2008 Location: Ontario	What brand of bbs are you using? I had alot of trouble with a set of new mags and thought they were crap... Turns out it was the bbs! Thru bastards in them and never had a problem again... If it's not the bbs check the feed tube to see if there are any burrs or imperfections in the seam of the mag and smooth these out then apply a light coating of silicone oil. Buy I'd try a different brand of bbs first. __________________

February 2nd, 2011, 21:42	#2
Rooster a.k.a. flamethis Trader rating Join Date: Mar 2010 Location: New Brunswick	Are they new mags? Maybe they could just use an oiling?

February 2nd, 2011, 21:55	#5
audi_bhoy Trader rating Join Date: Mar 2009 Location: Trois-Rivières	Have you tried pushing the mag forward? It seems to me that King Arms M4 mags are smaller than the magwell. If it is working, try putting some velcro on the back of the magwell.

February 2nd, 2011, 21:56	#6
drek Trader rating Join Date: Jan 2011 Location: Red Deer, AB	im using g&g .20g 90% natural, i also have a bag of g&g P.S.B.B .20g maybe ill try them, i found something about the mod but it doesnt go very in depth..i dont really understand it Posted By pmc84x "I've had JG, MAG, and King Arms mags fit, all you gotta do is shave down the lip on the back side where it locks onto the mag release. Takes 1-2 mins with a knife. Watch your fingers :P"

February 2nd, 2011, 22:01	#7
fleuryfighter Trader rating Join Date: Jul 2009 Location: Manitoba	I think its the hop up unit because i have a G&G M4 and my king arms mags Both Plastic and Metal ones feed fine. But i put a G&P Metal hop-up Unit in. ill go right now and check if i have a problem with the Old unit. EDIT: I loaded up one plastic and one metal King Arms Mag with bb bastard .28g bb's and They both fed fine first on semi then emptied on full auto at 20 +/- 1 bb/s. Maybe its the bb's but i have had no problems with the king arms mags __________________ Last edited by fleuryfighter; February 2nd, 2011 at 22:11..

February 2nd, 2011, 22:04	#8
drek Trader rating Join Date: Jan 2011 Location: Red Deer, AB	Well my highcap mag that came with the gun fires fine so its not the gun, its the KA mags

February 2nd, 2011, 22:13	#9
fleuryfighter Trader rating Join Date: Jul 2009 Location: Manitoba	It Might be the hop up unit?? or maybe the bb's __________________

February 2nd, 2011, 22:17	#10
Darklen Administrator Trader rating Join Date: Jan 2004 Location: Red Deer, AB	1/2" wide strip of loop Velcro on the back of the mag well should solve the problem. Some G&G AR models magwells are a bit on the loose side for non G&G mags, others are fine. __________________ *ASC Age Verifier for Red Deer & Area Alberta*

February 2nd, 2011, 22:45	#12
drek Trader rating Join Date: Jan 2011 Location: Red Deer, AB	ah ha! From what ive read, i tried shaving down the tab that holds the bb's in the mag, and boom it works just fine now. I put my orig highcap mag beside the KA mag and sure enough the tab that holds the bb's in is slightly bigger on the KA mag.

King Arms M4/M16 mags

Accessories Discussion