Helmet Gallery

swatt13 · December 11th, 2011, 12:11

Well Conker that helmet is pure sex. Arguably one of the most attractive helmets I've seen in my opinion

Dagger42 · December 11th, 2011, 12:27

Here's a old-ish MICH I have kicking around. I don't game it as it appears I have a big head and the helmet is too small. Base tan paint, Tamiya model paint for the Punisher skull.

Anyone interested it is for sale.

Curo · December 15th, 2011, 00:54

Ops Core Base Jump Multi-cam (bought used of a member here)
2 callsign matches in multi-cam (Taliban Milan's handiwork.)

All in all an excellent start to what I hope to make into an excellent helmet.

Conker · December 15th, 2011, 01:04

Quote:

Originally Posted by Cleric

@ Conker:
What did you use for the finish of the helmet? Krylon? Looks good.

Did two base layers with Krylon Tan, then snakeskin with krylon brown and green, and the final touches with a custom color with the airbrush to make it more "nature color" as Krylon is either way too dark (brown, green) or way too pale (tan).

Quote:

Originally Posted by swatt13

Well Conker that helmet is pure sex. Arguably one of the most attractive helmets I've seen in my opinion

Thanks man

Trunk_Monkey · December 15th, 2011, 02:25

Ebairsoft FAST Bump with some custom paint

SnapBack · December 18th, 2011, 03:23

Hey Conker, how did you get rid of the Moulded NVG mount on your FAST lid? And did you just epoxy and sand the holes?

Dingo · December 18th, 2011, 10:56

I cant answer for Conker, but I know that a lot of people dremmel it off, and then fill in the holes with welders putty. Then they sand the exess of and paint it. I dont remember if the how-to guide was in this thead or somewhere else on the internet (maybe gearsoc).

ILLusion · December 18th, 2011, 11:35

Quote:

Originally Posted by SnapBack

Hey Conker, how did you get rid of the Moulded NVG mount on your FAST lid? And did you just epoxy and sand the holes?

The ballistic version does NOT have moulded NVG. It's 3-hole mount.

http://www.ops-core.com/FAST_Ballistic_Helmet_P7C6.cfm

Dingo · December 18th, 2011, 12:25

Yes, but Conker has a Basejump that he modified.

Shirley · December 18th, 2011, 16:12

Grind down NOD shroud, sand, epoxy holes, sand, and paint.

koxdipy · December 19th, 2011, 13:21

My Gentex lightweight helmet.

Now i have a über-noob question, where do i have to attach the helmet cover straps to?

ViR · December 19th, 2011, 17:34

I also have a nub question, is there any DIY on helmet painting?

swatt13 · December 19th, 2011, 17:41

It's pretty much clean the helmet surface with spray9 or something to remove residue and oils, ensure you don't touch the surface afterwards, refrain from paper towel or something that will leave off lint. Hold the spray can about 10-12 inches away and dust it Ie sweeping sprays. Press the nozzle as you sweep and release. If you hold it in it will cake on and if your too close it will run. Don't worry about covering it all in one go. Dust on 2-3 layers it take a minute or two to dry between layers

SnapBack · December 19th, 2011, 20:32

Thanks, I just wanted to know if there was some magic trick I might not have thought of.

I have a replica of the FAST base jump, so I'm kind of stuck with it for now.

Sluggo · December 20th, 2011, 17:24

@koxdipy You've got the wrong type of cover....the one that's meant for the current generation LWH's with the padding have full velcro strips (similar to a MICH cover) while yours was meant to be wrapped around the headband of the old PASGT and original LWH design. You can make it work but you gotta buy some velcro, attach it to the straps and place it on the velcro (the pad goes over the velcro).

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 18th, 2011, 03:23	#546
SnapBack a.k.a. Bloodlust Trader rating Join Date: May 2008 Location: Edmonton	Hey Conker, how did you get rid of the Moulded NVG mount on your FAST lid? And did you just epoxy and sand the holes? __________________

December 18th, 2011, 16:12	#550
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	Grind down NOD shroud, sand, epoxy holes, sand, and paint. __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

December 19th, 2011, 13:21	#551
koxdipy Trader rating Join Date: Jun 2011 Location: Belgium	My Gentex lightweight helmet. Now i have a über-noob question, where do i have to attach the helmet cover straps to? Last edited by koxdipy; December 19th, 2011 at 13:24..

December 11th, 2011, 12:27	#542
Dagger42 Trader rating Join Date: Dec 2011	Here's a old-ish MICH I have kicking around. I don't game it as it appears I have a big head and the helmet is too small. Base tan paint, Tamiya model paint for the Punisher skull. Anyone interested it is for sale.

December 15th, 2011, 02:25	#545
Trunk_Monkey Trader rating Join Date: Dec 2011	Ebairsoft FAST Bump with some custom paint

December 18th, 2011, 10:56	#547
Dingo aka GhillieSnipes Trader rating Join Date: Sep 2010 Location: Western B.C.	I cant answer for Conker, but I know that a lot of people dremmel it off, and then fill in the holes with welders putty. Then they sand the exess of and paint it. I dont remember if the how-to guide was in this thead or somewhere else on the internet (maybe gearsoc).

December 18th, 2011, 12:25	#549
Dingo aka GhillieSnipes Trader rating Join Date: Sep 2010 Location: Western B.C.	Yes, but Conker has a Basejump that he modified.

December 19th, 2011, 17:34	#552
ViR Trader rating Join Date: Mar 2005 Location: Milton	I also have a nub question, is there any DIY on helmet painting?

December 19th, 2011, 20:32	#554
SnapBack a.k.a. Bloodlust Trader rating Join Date: May 2008 Location: Edmonton	Thanks, I just wanted to know if there was some magic trick I might not have thought of. I have a replica of the FAST base jump, so I'm kind of stuck with it for now. __________________

December 20th, 2011, 17:24	#555
Sluggo Trader rating Join Date: Jun 2011	@koxdipy You've got the wrong type of cover....the one that's meant for the current generation LWH's with the padding have full velcro strips (similar to a MICH cover) while yours was meant to be wrapped around the headband of the old PASGT and original LWH design. You can make it work but you gotta buy some velcro, attach it to the straps and place it on the velcro (the pad goes over the velcro).

Helmet Gallery

Gear Discussion