![]() |
|
|
||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers |
Community
![]() |
News/Info
![]() |
International Retailers
![]() |
IRC | Today's Posts |
![]() |
|
Thread Tools |
![]() |
#1 |
Adding a suppressor to a Cybergun Sig552
How much of a pain is it to do this? There's not much room to mess around with the stock barrel...
I can't stand the stock flash-hider on it and desperately want a short suppressor modded to the barrel. Any insight you can offer would be appreciated.
__________________
![]() |
|
![]() |
![]() |
![]() |
#2 |
I have a Marui SIG 552. I've read somewhere here that TM and Cybergun are "clones", so you should be able to remove it by turning it clockwise.
As for compatible suppressors, retailer can tell you which ones have the compatible threads. Last edited by 5.56; November 5th, 2009 at 13:30.. |
|
![]() |
![]() |
![]() |
#3 |
OK i own cybergun sig 552 and when i try to remove the flashhider it was glued. so when U take off the flashhider you might want to heat up the flash hider and turn it clockwise. and for the suppressors you have to get CCW suppressors.
__________________
![]() |
|
![]() |
![]() |
![]() |
#4 |
Think I can just thread the outer barrel (or is there a bushing I can put on)? or is there much more to it.
Thanks Gents
__________________
![]() Last edited by ATF-Hatman; November 5th, 2009 at 15:46.. Reason: n00b |
|
![]() |
![]() |
![]() |
#5 | |
GabeGuitarded
|
The outer barrel is threaded underneath the flash hider. The one on the Cybergun is stuck on pretty hard, but once you get it off you don't need to modify anything.
__________________
Quote:
|
|
![]() |
![]() |
![]() |
#6 |
Sweet. That's awesome news.
Thanks
__________________
![]() |
|
![]() |
![]() |
![]() ![]() |
|
Bookmarks |
Thread Tools | |
|
|
![]() |