![]() |
|
|
||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
![]() |
|
Thread Tools |
![]() |
#1 |
disassemble mp5k?
Does anybody have advice on hoe to get the TM mp5k apart? :cheers:
Sry, i just want to change out the barrel |
|
![]() |
![]() |
![]() |
#2 |
Is it broken? If not, dont touch it.
Next best advice, find a local expert when you do it the first time. Watch. |
|
![]() |
![]() |
![]() |
#3 |
there is the foregrip pin, and the 2 stock plate pins, take them all out, disconnect the wires from the back. There is some screws on the body, you need to take those completely out, they are about an inch and a half long, go right through the body. Pull the receivers apart gently, it takes some force to seperate them though. Then pull the barrel assembly out, remove hopup, and reassemble with new barrel. Check the diagram to see what i mean. replacing the barrel is easy to do. Give it a try, you wont learn how if you never try it for yourself.
|
|
![]() |
![]() |
![]() |
#4 |
Its an mp5k, and all the screws have been removed, it doesn't look like the reciver slits in two. still can't get this thing apart?
|
|
![]() |
![]() |
![]() |
#5 |
Hammer?
|
|
![]() |
![]() |
![]() |
#6 | |
Lego Head
|
Quote:
LOL!... Fix the FPS problems some guns were having at Quickpass :P... LOL... only a couple.. |
|
![]() |
![]() |
![]() |
#7 | |
Quote:
|
||
![]() |
![]() |
![]() |
#8 |
trust me, ive had an mp5k. hold the front, and pull the pistol grip out the back, you take the butt plate off, disconnect the wires from the mechbox, and pull backwards, thats how it works.
|
|
![]() |
![]() |
![]() ![]() |
|
Bookmarks |
|
|
![]() |