Quote:
Originally Posted by Whytfargorn
Thanks for the infos... my Pro-Win 8mm just arrived today ;-)
Will start at the Weekend with the conversion. :-)
btw : PM send  |
just some quick info. the hop-up sleeves that come with the Pro-Win gear box, throw them out. the BB feed side is too narrow and will not feed BBs into the hop-up correctly, so you will strip your piston if you use them.
also the aluminum airseal nozzle is 1.2mm too long and will also cause problems. you can either file/grind the front down to the correct size or replace it with an after market one. i would recommend the Modify Airseal nozzle. i'll have more info in the write up im doing on the modifications needed.