Airsoft Canada - View Single Post - USR11

Skladfin · April 7th, 2009, 20:24

put the rear side in first, and make sure the bottom of the trigger guard is in all the way.

Then push down the front side, you might use some force, but not too much.

April 7th, 2009, 20:24	#3
Skladfin Trader rating Join Date: Dec 2006 Location: Glace Bay, Nova Scotia	put the rear side in first, and make sure the bottom of the trigger guard is in all the way. Then push down the front side, you might use some force, but not too much.