Ok now that I have everything back together, and have had the chance to put a few rounds through it, another problem has come up.
(using .2's) On auto everything shoots fine, however on semi every few shots will be a double feed.
(using .25's) I am luck if it will fire 5 rounds before jamming up in the hopup unit. It appears that 2 bb's are getting jammed and not allowing the nozzel to move forward. (had problems with .25's for a while)
Now I have searched around and came across this thread
Double Feed/Mag Dumping Issue - Need Nozzle Data - Airsoft Canada . This got me thinking, so I checked in the magwell and indeed the nozzel is barely visable in the hop up unit after firing on semi. After firing on auto, it is visable to a varying degree.
My question: Would my sector gear **(see previous pics) be causing the tappet plate to be in a half cocked postion after shooting semi, thus keeping the nozzel from returning forward after the shot, thus allowing possibly more then one bb to be loaded?
** as a side note, does anyone know why G&P sector gears have a large tappet plate interaction pin