Quote:
Originally Posted by Styrak
He said he tested the compression UNDERWATER.
|
while water is and effective means for checking leaks some times you have to rember that water and air are two different mediums and you should never discount the problem simply because of one type of test. I would hazard a guess that the spring is fubared or your not getting the mech box aligment with the hop unit correct. you said you put foam in there and it made it worse? to me that says improper placement of parts in the body of the gun. I would recommend that you just simply start from scratch and dissasmble everything and go over each individual peice as you re assembly and check it from time to time as best you can. I would also recomend you take a day or two to take a break. workin on an aug is fustrating enuf without you bashing parts cause your pissed. Relax Jimski your smart and you'll figure it out. PM me if you need help.
Sincerly
Blair