Quote:
Originally Posted by tunabreath
There is a little mod that I've heard of working, but it requires some work:
Basically, remove the plastic nozzle below the chamber (the one that holds open the retainer on the mag so that the BBs can feed into the gun) and drill a small hole in it. Cut a tiny segment off of a very thin o-ring and glue it in the hole, so that a tiny nub sticks out inside the nozzle, enough the catch loose BBs, but not enough to snag fed ones.
Never tried it myself.
|
Hmmm.....i'll try that this weekend! I'm not sure what you mean by plastic nozzle though. Do you mean the bottom of the hopup assembly?
And i know you can hold it upside down, that's usually what i do. But if there was a 15 min. mod that would save me from doing that forever it would be worth it.