Airsoft Canada - View Single Post - Hi-Capa 4.3 : Creation Outer Barrel Compatibility with PGC slide

jaoquinz · January 6th, 2009, 22:51

A spare stock p226 recoil spring mate.

I just enlarged the inner diameter by flexing the spring a little and adjusting it slightly. You only need it larger on the last 4 or 5 coils on the muzzle end, to push the barrel and chamber forward SLIGHTLY. You might want it tight ie. stock recoil spring diameter on the hop-up unit end so it doesn't slide up and down the inner barrel. I secured the spring with some electrical tape. Snip off some coils if you have too much loading. You only need a little.

I'll take some pictures next time.

January 6th, 2009, 22:51	#26
jaoquinz Trader rating Join Date: Dec 2008 Location: Hong Kong	A spare stock p226 recoil spring mate. I just enlarged the inner diameter by flexing the spring a little and adjusting it slightly. You only need it larger on the last 4 or 5 coils on the muzzle end, to push the barrel and chamber forward SLIGHTLY. You might want it tight ie. stock recoil spring diameter on the hop-up unit end so it doesn't slide up and down the inner barrel. I secured the spring with some electrical tape. Snip off some coils if you have too much loading. You only need a little. I'll take some pictures next time.