Airsoft Canada - View Single Post - CA only firing when motor height is being adjusted

incrediboy729 · December 24th, 2008, 19:21

Well, to start off, happy holidays everyone! But anyways on to my problemo:
I have a CA m15a4 Carbine. For some reason when i fire, it will fire fine for a while and then either:
A. The motor will get slower and slower and then just stop
B. Just all of the sudden stop, but you can still hear the motor "rrrrr"....it's not going anywhere but is trying; basically struggling to turn over but can't.
C. It will do absolutly nothing.
So, I will adjust the motor height. Then it will repeat the process above. Like just BARELY even turn the screw and it will do ^^^.

So now, it has gotten worse. It will not fire unless am holding down the trigger in auto and adjusting the motor height; and even then it will only fire for 3 secs max.

Sorry if this was really confusing but i tried my best to explain.
Thanks in advance for your help.
-Brett

December 24th, 2008, 19:21	#1
incrediboy729 Trader rating Join Date: Dec 2006 Location: California, USA	CA only firing when motor height is being adjusted Well, to start off, happy holidays everyone! But anyways on to my problemo: I have a CA m15a4 Carbine. For some reason when i fire, it will fire fine for a while and then either: A. The motor will get slower and slower and then just stop B. Just all of the sudden stop, but you can still hear the motor "rrrrr"....it's not going anywhere but is trying; basically struggling to turn over but can't. C. It will do absolutly nothing. So, I will adjust the motor height. Then it will repeat the process above. Like just BARELY even turn the screw and it will do ^^^. So now, it has gotten worse. It will not fire unless am holding down the trigger in auto and adjusting the motor height; and even then it will only fire for 3 secs max. Sorry if this was really confusing but i tried my best to explain. Thanks in advance for your help. -Brett __________________