Airsoft Canada - View Single Post - WHat does a gearbox require in order to take a lipo?

TriChrome · September 29th, 2008, 18:44

I can't find a spec sheet on my Intellect 4200mah Ni-Mh cells, but they'll do over 30 amps. My 10.8v battery pack peaks at over 14 volts when it's fully charged.

Li-Poly's depend on the pack. Some like the Firepower ones that fit in the stock tube of an M4 do about 15 amps, others can be well over 100 amps on a pricier pack. 11.1v Li-Poly's peak at 12.6 volts (and it's not safe to charge them over that).

September 29th, 2008, 18:44	#14
TriChrome Trader rating Join Date: Aug 2008 Location: New Jersey, USA	I can't find a spec sheet on my Intellect 4200mah Ni-Mh cells, but they'll do over 30 amps. My 10.8v battery pack peaks at over 14 volts when it's fully charged. Li-Poly's depend on the pack. Some like the Firepower ones that fit in the stock tube of an M4 do about 15 amps, others can be well over 100 amps on a pricier pack. 11.1v Li-Poly's peak at 12.6 volts (and it's not safe to charge them over that). Last edited by TriChrome; September 29th, 2008 at 18:49..