Quote:
Originally Posted by Marriott
Thats nearly identical to mine.
CA M15A4 SPC
Standard Gears
Prometheus POM pistonhead
Guarder Piston - Swapped out the CA but didnt need to as it was imaculate even after 80,000 bb's
Stock Motor
4200mAh Intellect Battery 9.6v
Prometheus MS110SP
Prometheus 6.03mm Tightbore
Also @ 22 rounds per seccond.
|
I put about 20 000 rounds through mine stock before opening it to upgrade the spring. Having everyone tell me the potentially problematic parts when upgrading the spring, I bought all the replacements to install with the new spring. I got a Systema bearing spring guide, Systema silent piston & cylinder head set, Systema tappet plate, Systema polycarb piston and Systema nozzle. Basically, every part of the compression system except the cylinder itself.
When I got it opened, the only stock part that showed any sign of (very minor) wear was the spot on the tappet plate where the sector gear nub connects with it. But I swapped the parts nonetheless. The new Systema polycarb piston lasted all of about 200 rounds before blowing up. I reinstalled the stock piston and it's been fine since (about 5000 rounds since). The Systema tappet plate lasted maybe 500 rounds before it broke, and I reinstalled the stock tappet plate which has been in for about 4500 rounds now and no issues. Seems like the stock CA parts are more durable than "top of the line" Systema after-market parts (and yes, I got real Systema, and not Area 1000 parts).
Quote:
Originally Posted by dragwindsor
What else would I need besides a motor and gears?
Thanks guys
|
You need everything - the trigger assembly, selector plate, cutoff lever, wiring, etc.