|
to sub-directly quote PDI:
"6.01mm for velocity, 6.05mm for accuracy"
by the way, this is not a battle between brands, its a battle between bore sizes.
one argument that was voiced had said "It is argued that the gap between the barrel bore and BB becomes too small when the barrel is made too tight. I can say for sure that it is possible to make a too small gap. I don't argue at this point what the optimal gap is, but PDI says their 6.05 barrels are more accurate than 6.01 barrels. In the above test we have seen that a 6.03 barrel beat a 6.01 barrel. Further tests are necessary to form a consensus on this matter."
|