Airsoft Canada - View Single Post - Worklog: Projeckt RPG-2

Kokanee · August 6th, 2008, 19:27

So after quite a bit of procrastinating I've finally gotten to the trigger/grip assembly;

This is the first piece, going to be used as a template to make others. 1/8" aluminum, cut with a jigsaw rough and then filed down to the exact dimensions.

I'm thinking I'll just rough cut the rest, drill and rivet them all together then file them down to spec as one piece.

( some rough cut pieces beside the template )

August 6th, 2008, 19:27	#5
Kokanee Ministry of Peace Trader rating Join Date: Mar 2002	So after quite a bit of procrastinating I've finally gotten to the trigger/grip assembly; This is the first piece, going to be used as a template to make others. 1/8" aluminum, cut with a jigsaw rough and then filed down to the exact dimensions. I'm thinking I'll just rough cut the rest, drill and rivet them all together then file them down to spec as one piece. ( some rough cut pieces beside the template )