Airsoft Canada - View Single Post

jtf2-phalanx · July 7th, 2008, 15:23

Usually, you need to take out the motor and the 2 screws which hold the lower receiver to the mechbox. After you do that, the lower receiver won't slide back but down.

Oh yeah, and you'll have to take out the selector switch as well. There is a small screw on the bottom of one of the switches itself. From there you can remove the other side once you've taken out that side.

July 7th, 2008, 15:23	#4
jtf2-phalanx Trader rating Join Date: Dec 2001 Location: Vancouver, BC	Usually, you need to take out the motor and the 2 screws which hold the lower receiver to the mechbox. After you do that, the lower receiver won't slide back but down. Oh yeah, and you'll have to take out the selector switch as well. There is a small screw on the bottom of one of the switches itself. From there you can remove the other side once you've taken out that side. __________________ "Any punk can shoot from across the room but it takes a real man to get close enough to stab" "Why cause a huge disturbance when you just wanna kill ONE guy?" - Chris Rock Last edited by jtf2-phalanx; July 7th, 2008 at 15:24.. Reason: more info