Airsoft Canada - View Single Post

Jiggiwatt · July 7th, 2008, 14:20

I was plinking with my TM MP5 SD6 this weekend and all of a sudden it stopped firing. I get a sound as the motor tries to spin, but it just heats up and won't fire.

This lead me to start taking apart the gun to get at the mechbox, however I can't remove the damned lower receiver. My experience is with CA guns, and not TM, which is my only excuse since this seems so simple. I've removed the pin which holds the stock on and removed the stock, and removed the pin near the magwell. Shouldn't the receiver just slide out towards the back now ?

I've pulled with a lot of force, but the damned thing won't budge. Am I missing something ?

July 7th, 2008, 14:20	#1
Jiggiwatt Trader rating Join Date: Oct 2007 Location: Ottawa, ON	TM MP5 SD6 lower receiver removal I was plinking with my TM MP5 SD6 this weekend and all of a sudden it stopped firing. I get a sound as the motor tries to spin, but it just heats up and won't fire. This lead me to start taking apart the gun to get at the mechbox, however I can't remove the damned lower receiver. My experience is with CA guns, and not TM, which is my only excuse since this seems so simple. I've removed the pin which holds the stock on and removed the stock, and removed the pin near the magwell. Shouldn't the receiver just slide out towards the back now ? I've pulled with a lot of force, but the damned thing won't budge. Am I missing something ? __________________ "You want to talk to God ? Let's go see him together, I haven't got anything better to do."