|
I posted the info in my review thread. The original nub was so small that it didn't press down on the sleeve at all, even at the maximum setting. The wire insulation I used was significantly thicker than the original nub (and 16 gauge wire isn't that big, but it was bigger than the original nub. And it seemed to work fine. I laid it sideways like the original (vs the 'fix' of standing the original on end like that review states). I reassembled the barrel / hopup assembly, tightened the hopup, and I could easily see its effect on the sleeve. I tried it out, and it worked fine.
__________________
|