Airsoft Canada - View Single Post

Kos-Mos · May 2nd, 2008, 17:10

You NEED an new barel, as the stock one is not made the same way.

You need a 500mm barrel. I used one from an M14, but the stop screws won't be in the notches on the barrel.

Still works perfectly. For AEG it is a problem, but not for that the PDI hop-up chamber.

I am using a M16 509mm 6.04 tightbore from DeepFire. So far, I get a perfect flat flight up to about 200'.

May 2nd, 2008, 17:10	#22
Kos-Mos Trader rating Join Date: Nov 2005 Location: Lévis (QC)	You NEED an new barel, as the stock one is not made the same way. You need a 500mm barrel. I used one from an M14, but the stop screws won't be in the notches on the barrel. Still works perfectly. For AEG it is a problem, but not for that the PDI hop-up chamber. I am using a M16 509mm 6.04 tightbore from DeepFire. So far, I get a perfect flat flight up to about 200'.