|
Seriously, you dial in the red dot to the target vs, where the BBs are hitting. After that you only need to put the red dot on what you want to hit and the BBs go there. So you can remove both your front and rear sights, just use the RDS by itself (remember to remove the dust covers on the elevation/windage adjustments to get to the screw underneath, common noob mistake to turn the dustcovers when zeroing and finding no change) and you are good to go.
BTW, don't zero at anything less than 25ft, you will not be able to do it right. Zeroing above that will clear you past 100ft easy depending on BB weight (0.20g sucks ass for outside).
|