|
Dont mean to bump a dead thread but,
Just pulled apart my p226 and re angled the catch. One thing that wasn't mentioned was that you need you also cut into the outside slide lock part(The plastic)
Also, when you take out the blow back chamber, take note to the position of the spring/spring guide... im still trying to figure out how it goes back in.
But you dont need that spring in there, it just means that the loading nozzle wont go back when you pull the slide back, it will go only far enough to alow it to load another round
__________________
Quote:
Originally Posted by .Andrew.
turns out i had to take the battey out of the stock and charge it right from the battery wire..not the wire that connects to the gun
|
|