Quote:
Originally Posted by CDN_Stalker
One thing you should know, when using the Hi-Capa with propane in warm to hot weather, the gun WILL burp the O-ring in the slide (is in the rear of the slide in the blow back assembly) forward and jam up your gun. Is typical of the design, easy to fix with tools and some time, but annoying non-the-less. Seen it a few times, the last time it happened I was able to fix it mid-game (I was in a tower with the owner hunting snipers so I had the time to do so) and it took me about 20mins to sort out.
|
This issue only happened with the first generation of Hi-Capa 5.1s. Since then, Marui has corrected the design with a cupped design rather than an o-ring, and as a result, the chance of an o-ring blowout is pretty much nil... because there isn't an o-ring anymore. :P
The same design is used on all 4.3s and P226s.