Quote:
Originally Posted by Raygis LasVegas
FOX_111, what upgrades do you have for the CA M24? What velocity is it shooting at right now?
Do you ever notice that sometime the sear doesn't catch onto the piston when cocking the CA M24? Or sometimes it is difficult to return the bolt into battery once the action has been cocked?
|
Everything is upgrader except the trigger group. It's shooting a 450fps with .20g.
I never got the problem you mention. Sometime, it's hard to push the bolt back to battery, but that indicate that the mag is empty. It's the nozle pushing on the empty mag lips. If you push too hard, the nozle will make it's way past it, but will scratch the lips and ruin your mags in the long run. When cycling the bolt, you have to be verrrrry gentle. Pull it traight out, wait for the click, than push it slowly back in, feel the BB feed in than aim and shoot. It's hard to do, since the bolt is hard to pull and you have to keep the butt firmly on your shoulder while pulling the bolt. When prone, you have to get the hang of it without pulling a mussle haha.
I once had some problem with it. It was caused by looses screws inside that did not hold the inner barrel in place. Stalked had to one occasion, retap all the main screws because the rifle was not shooting anymore. Not it's fixed and the rifle is back in buisness.