Airsoft Canada - View Single Post

lupo · August 22nd, 2007, 00:43

I cant say for sure but i suspect that the ca m24 civ and mil version (ie fluted and non fluted) are internally the same. Ive had mine since they came out (first one in canada) and it has served me well. I recently did an overhaul on it due to some design flaws. Basically if you get a nice stainless cylinder kit. Like http://www.wgcshop.com/pcart/shopper..._cat_PDI Parts or this http://www.wgcshop.com/pcart/shopper..._cat_PDI Parts And a nice spring your pretty much set. It should be noted as the spring tension increases so does the trigger pull weight. Mine was up too well over 10 lbs with a 300% spring so i decided to replace the whole trigger assembly with a first factory aps zero trigger. With some slight mods to the m24 trigger guard its worked out great.

August 22nd, 2007, 00:43	#27
lupo Trader rating Join Date: Dec 2001 Location: vancouver	I cant say for sure but i suspect that the ca m24 civ and mil version (ie fluted and non fluted) are internally the same. Ive had mine since they came out (first one in canada) and it has served me well. I recently did an overhaul on it due to some design flaws. Basically if you get a nice stainless cylinder kit. Like http://www.wgcshop.com/pcart/shopper..._cat_PDI Parts or this http://www.wgcshop.com/pcart/shopper..._cat_PDI Parts And a nice spring your pretty much set. It should be noted as the spring tension increases so does the trigger pull weight. Mine was up too well over 10 lbs with a 300% spring so i decided to replace the whole trigger assembly with a first factory aps zero trigger. With some slight mods to the m24 trigger guard its worked out great.