Airsoft Canada - View Single Post - SR-25 sling

Drake · August 4th, 2007, 17:54

I use the King Arms ones, haven't had any problems with them (they're made of aluminum, so no rust. One more thing I like about KA, they actually specify on the package what their shit's made of... 6061 T6 AL in this case).

Anyway, the QD swivels you really need to press down on that button and then pull the swivel off to remove it. It seems almost impossible it would come off by itself/by accident, since you need to push down while pulling.

The KA ones also seem compatible with the real steel (I'm guessing G&Ps are, too). I was able to use a QD swivel in my [real] VLTOR stock just fine.

Oh yeah, and like Adrian mentioned, if you're using two twisting can become a problem; you'd want a 3 pt setup in that case, so that the swivels can't freely turn 360°.

August 4th, 2007, 17:54	#6
Drake E-01 Trader rating Join Date: Dec 2001 Location: Montreal, QC	I use the King Arms ones, haven't had any problems with them (they're made of aluminum, so no rust. One more thing I like about KA, they actually specify on the package what their shit's made of... 6061 T6 AL in this case). Anyway, the QD swivels you really need to press down on that button and then pull the swivel off to remove it. It seems almost impossible it would come off by itself/by accident, since you need to push down while pulling. The KA ones also seem compatible with the real steel (I'm guessing G&Ps are, too). I was able to use a QD swivel in my [real] VLTOR stock just fine. Oh yeah, and like Adrian mentioned, if you're using two twisting can become a problem; you'd want a 3 pt setup in that case, so that the swivels can't freely turn 360°. __________________ Last edited by Drake; August 4th, 2007 at 18:00..