Quote:
Originally Posted by Fox Hound
if u had 30 amps running through your wires it would burn out your 16GA wires. Its rated for about 8-10amps if i remember correctly. You can actually wire your entire AEG with 22GA wire because its rating is at 5amps.
Those batteries should be discharged at what ever they are rated for. 2700mah = 2.7amps, 1500mah = 1.5 amps. Are you saying you have a battery charger and discharger in one? If not, just put a small light bulb to it or a resistor to deplete the energy if its a NiCAD. NiMH you dont need to because it doesnt have cell memory
|
Actually a NiMH will develop a memory over time.It may takes a very long time but it will develop a memory.You really don't need to discharge a NiMH battery anyway.I'd suggest to run the battery as low as you can before charging it again.