Quote:
Originally Posted by ROF_Madman
1.what would happen if i just filed down two teeth on the piston? would that work?
|
Only experimentation can give you that answer. Have a slush fund on hand to pay for replacement parts. Most superhigh ROF setups are done on short barreled guns. The SR16 would be considered medium-length, and as a result, you don't have too much room as to how many teeth you can take off. As long as you leave enough teeth so that the piston heads o-ring can get ventilation from the cylinder port, you should be okay. I don't have an open gearbox with a similar setup available to check at the moment. You may want to experiment with your stock gears and piston first, so that if you smoke the parts, it won't be an expensive part.
Quote:
Originally Posted by ROF_Madman
2.If i were to get the Angel silent head set piston how well do you think my gun were to perform?
|
Much quieter and softer on your gearbox. This is the quietest silent head set available.