Airsoft Canada - View Single Post

Shinjin_MC · September 26th, 2006, 01:40

I used an exacto blade to work it out, then needlenose pliers to finish the job if I remember right
I dinged up the stock plastic slide slightly while taking it out

September 26th, 2006, 01:40	#6
Shinjin_MC Trader rating Join Date: Dec 2003 Location: sauga, on	I used an exacto blade to work it out, then needlenose pliers to finish the job if I remember right I dinged up the stock plastic slide slightly while taking it out