|
1-pull the stock release pin all the way to the bottom, pull stock off
2-unscrew the tail cap
3-remove buffer tube via the phillips screw in the buffer tube
4-unscrew the mototr plate ( under the grip)
5-remove motor, don't lose the little round plate.
6-remove front grips
7-unclip the two wires off the fuse plate
8 unpin the receiver
9-remove upper from lower
10-unscrew the pistol grip
11-unscrew the mag release
12-unscrew the feed tube
13-unscrew the little wire holder in front of the feed tube
14-remove cross pin
15-wiggle the mechbox out of the lower, a little prying force will be needed
that should be it
__________________
Vondnik, team Bad Karma, PQAC
Murphy's second rule: Nothing is impossible for the man who does not have to do it himself.
|