Quote:
|
Originally Posted by ILLusion
When you re-shim, it will adjust the height of the bevel gear, and as a result, the motor must be readjusted.
|
Huh, thats good to know... damn too bad I already took apart my gun because I got bored last night :smack:
Quote:
|
Originally Posted by ILLusion
Did you close it up with the screws as well? It does make a difference.
|
I closed it up and put all the screws in as my last check. When I reopend it last night I did the same thing. The gears turn with minimal effort so it doesnt seem like the motor would get hung up on them.
Quote:
|
Originally Posted by ILLusion
Yes, you should. There should be about 0.2-0.3mm of wiggle in the axles. If there's no play in the gears, that adds various problems from very loud gearboxes to cranking difficulties.
|
hmm in the guides I read, i thought they said that I wanted the spur gear and sector gear to be tight and the Bevel gear could have a little play. So that's wrong? It could be, I know not everything on the internet is accurate, just want confirm. Thanks for your help!