Airsoft Canada - View Single Post

PsHycho Giraffe · June 18th, 2006, 05:13

I'd just like to ask a quick question in the relevant thread.

I'm wondering if it's possible to put a "working" (not just for show) M203 on an ICS M16. It appears that in order to do this properly there's some mod work involved because the parts are meant for TM, and I'm not entirely sure if ICS makes an M16 RIS bottom rail or something similar. If anybody can clear this up for me or at least clarify what exactly is possible I'd appreciate it a lot.

June 18th, 2006, 05:13	#9
PsHycho Giraffe Banned Trader rating Join Date: Dec 2005 Location: Alberta	I'd just like to ask a quick question in the relevant thread. I'm wondering if it's possible to put a "working" (not just for show) M203 on an ICS M16. It appears that in order to do this properly there's some mod work involved because the parts are meant for TM, and I'm not entirely sure if ICS makes an M16 RIS bottom rail or something similar. If anybody can clear this up for me or at least clarify what exactly is possible I'd appreciate it a lot.