Quote:
|
Originally Posted by LUTNIT
Well whats listed there is pretty much an upgraded everything in the mechbox, but it doesnt list a reinforced mechbox shell. Also I dont have experience with this but have been told that the Teflon barrels are no better than the other tightbores but cost more. I've heard many good things about the Systema brass 6.04mm barrels, brass is also self-lubricating from what I'm told.
|
Reinforced v6 gearboxes do not exist.
TN (Titanium-Nitride, not teflon) inner barrels are more self-lubricating than plain brass. The TN coating is longer wearing as well, as it is the same coating used on many drill bits for it's hard wearing and self lubricating properties. Also, plain brass has a tendency to pick up oxidation and if left sitting for long enough unprotected, it will get a rough oxidized surface until it's cleaned (which can be a pain if it gets to that point.)
But for the price you pay, Systema 6.04mm inner barrels will do the job fine. Just have to remember to keep them clean and oiled well.
If you have the money, I'd recommend the Prometheus 6.03mm electro-plated inner barrels. But once you move to tightbore inner barrels, you CAN NOT use poor quality ammunition anymore or you could risk tearing your gearbox apart.
Quote:
|
Originally Posted by Cronyx
The gun fires really long, and really hard, FPS 400+, but my ROF is kinda low. Any way to upgrade that without sacrificing power and speed, or is that just a static trade off that you have to pick one or the other, FPS or ROF?
|
Eagle Force Hummer 1300L motor. That thing will give your ROF and torque a massive boost. The general rule is that if you upgrade ROF, torque goes down, and vice versa.
But the motor itself is an item that can raise the middle-point of these two characteristics to a higher level.