|
Required:
1x Computer
1x Internet connection
1x Pic of desired logo
1x Inkjet or Laser Printer
1x Razor blade or scalpel or other similarily sharp tool
1x Can/spray can of paint.
Step 1: Find the logo you want.
Step 2: Scale the logo to fit where you want.
Step 3: Print the logo out on your printer.
Step 4: Use that sharp tool and cut out the letters/design where you want paint.
Step 5: Place on slide using masking tape (don't cover any spots you cut out!)
Step 6: Paint, but be very careful and don't use too much paint or it will run under the edges.
|