Airsoft Canada - View Single Post - Aster installation issue

volteco · March 25th, 2020, 10:02

I have installed Aster MOSFET and I don't have any response when I press the trigger. It gives 3 motor beeps when I connect the battery and the LED next to the trigger sensor flashes RED and YELLOW rapidly 3 times and then turns off. I don't see white light coming from it as shown on promotional pictures. When I do it with the gearbox opened the trigger sensor reacts to the light - if I shine the light on it, motor beeps and the other LED flashes RED and YELLOW again. I do have to mention that I have purchased front a wired unit and resoldered it to be a back wired. Any advice would be very much appreciated.

March 25th, 2020, 10:02	#1
volteco Trader rating Join Date: Jul 2012 Location: Etobicoke	Aster installation issue - help needed! I have installed Aster MOSFET and I don't have any response when I press the trigger. It gives 3 motor beeps when I connect the battery and the LED next to the trigger sensor flashes RED and YELLOW rapidly 3 times and then turns off. I don't see white light coming from it as shown on promotional pictures. When I do it with the gearbox opened the trigger sensor reacts to the light - if I shine the light on it, motor beeps and the other LED flashes RED and YELLOW again. I do have to mention that I have purchased front a wired unit and resoldered it to be a back wired. Any advice would be very much appreciated.