Airsoft Canada - View Single Post - VSR-10 upgrade spring size

That_Limey_Brit · July 24th, 2019, 22:41

Sounds like you've done most the work. Get the M150 and give her a whirl. You might find it does exactly what it says on the tin.

If it is a tad over, (like 520fps) then you can afford to cut 1-2coils off at a time. Just make sure you don't cut too much down that your piston goes slack.

:EDIT: Be aware of your joule creep though. If you're using .45's and running with good air seal and close to 500fps... You're gonna get pulled up.

July 24th, 2019, 22:41	#4
That_Limey_Brit Trader rating Join Date: Jul 2019 Location: Coquitlam BC	Sounds like you've done most the work. Get the M150 and give her a whirl. You might find it does exactly what it says on the tin. If it is a tad over, (like 520fps) then you can afford to cut 1-2coils off at a time. Just make sure you don't cut too much down that your piston goes slack. :EDIT: Be aware of your joule creep though. If you're using .45's and running with good air seal and close to 500fps... You're gonna get pulled up. __________________ *Oh no! They're after my cargo of sugar, tobacco and spices!* Last edited by That_Limey_Brit; July 24th, 2019 at 22:43.. Reason: Joule creep!