[catsgowoof]

Hi everyone, I've got a BTC Spectre Mk2 installed in my VFC VR16.

When I press the trigger, there's a short, dull "click" and the gears then lock up, with two beeps from the motor coming thereafter.

I thought that this might be because of tight gears, so I've taken out all the shims and even tried the stock gearset without success. I've also taken off the grip plate and depressed the motor down with my finger and attempted to cycle it, thinking it was the motor being pressed down too far, but again, two beeps and then nothing. I've also tried two separate motors, one high-torque and one stock, both of which I know work.

Any suggestions would be great!