Airsoft Canada - View Single Post - G&G GR-25 body change

Danke · March 14th, 2018, 13:19

Make sure you have a proper punch. That way it's way easier to drift pins out.

No roofing nails, no allen keys, a proper small punch. Just a couple bucks at Lordco.

Build up a little rest out of some wood so you're not hitting the unsupported barrel. Use soft wood so if you need to drive the pin into the wood you won't damage it.

The 2 big sliver pins underneath may be ornamental, or they may need to come out too. The roll pin should go to either side but those pins may be one side only.

March 14th, 2018, 13:19	#8
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	Make sure you have a proper punch. That way it's way easier to drift pins out. No roofing nails, no allen keys, a proper small punch. Just a couple bucks at Lordco. Build up a little rest out of some wood so you're not hitting the unsupported barrel. Use soft wood so if you need to drive the pin into the wood you won't damage it. The 2 big sliver pins underneath may be ornamental, or they may need to come out too. The roll pin should go to either side but those pins may be one side only. __________________ Airsoft, where nothing is hurt but feelings.