Quote:
Originally Posted by zReaperAssassin
So, the bucking is as far forward in the Hop as it can get, is a G&G green flat hopped. Cylinder is a 3/4 ported with a 275mm inner barrel. Nozzle is original aluminum o ring nozzle that came with the gun, so assume it is correct length.
|
You tried swapping back to the original piston or tried another piston?
You can over compress too. I did it in my EBR. I had a double o-ring piston head and new piston and for the life of me couldn’t figure out why I was shooting way less than it should have. Until I swapped the piston and piston head. I had serious compression but it was too much for it to handle. I’m guessing most of the air was blowing out the Hopup into the magazine. Almost like I was getting back pressure.