Quote:
Originally Posted by ThunderCactus
each tooth will take ROUGHLY 10-15fps off.
M110 is generally 380 under ideal conditions, so you should be in the 350fps range.
Things that make a difference:
-piston head bearing
-spring guide bearing
-barrel bore
-whether the hop is on or off
-type of hop
-quality of BBs
-air nozzle O-ring
-overall compression
Do a compression test, make sure there's no air leaking out of the cylinder under compression.
|
Post says I did a compression test prior to putting back together, with nozzle on, and it did wonderfully. I do have a piston head bearing and bearing spring guide. I have a flat hop and it was on. BB's used were 0.2g Gryphon bb's. Barrel bore is 6.05 I think? Otherwise I'm unsure, like I said could be ported cylinder, but it is only a 3/4 port.